by Ed Katz
Even in a slow economy, consolidation, mergers and reorganization force companies to move in order to succeed, survive, and remain competitive. These three simple steps will minimize the risk of damage to your building.
1. Ask about carpet protection
Contact the tenants mover and ask how they plan to protect your carpets. If they use a clear vinyl carpet mask, warn the mover if carpets will be steam cleaned shortly before the move. Using the vinyl mask (with brand names Carpet Shield, Vistick, Pathrite, PRO TECT®, and Carpet Cover) on moist carpet can leave a sticky residue thats very difficult to clean. In some cases the carpet is ruined and must be replaced. Most vinyl mask manufacturers warn against using their product on moist carpet and often deny any loss or claim arising from such use.
Applying vinyl carpet protection.
If using a vinyl carpet mask is not possible, the mover should use clean Masonite®. However, Masonite® is labor intensive to install and remove, walks or moves on the carpet, and can leave a powdery residue that has to be vacuumed up after the move.
2. Schedule a pre-move inspection
Set up a walkthrough with your tenant and a representative from
|his or her moving company. The three of you can inspect and record the condition of your building in the following areas:
-- elevator cab walls
-- elevator doors, both lobby side and cab
-- elevator floor
-- lobby-side elevator entrance - the walls and frames adjacent to the elevator for both the building lobby and the tenants floor
-- main building entrance doors, inside and out
-- halls, walls, and floors along the path that the furniture will follow both upstairs on the tenants floor and the lobby level
-- tenants office space (if the tenant is new to your building)
Immediately after the move, for example, early Monday morning if the move occurred over the weekend, identify and record any new damage you discover, and notify both your tenant and the mover verbally and in writing. If the mover doesnt respond, the tenant is ultimately liable for the damage.
3. Install elevator & door protection
To minimize the risk of damage to the inside of the elevator cab, be sure to hang your custom fitted elevator pads.
To protect elevator entrances, install Mat-A-Doors®. The patented vinyl-covered, high-density foam and plastic panels repel blunt force to protect the elevator frames and lobby-side adjacent walls to significantly reduce the risk of damage from movers and other contractors.
Mat-A-Doors® also work on main building glass entrance doors if freight needs to pass through during a move, construction, or demolition.
Contact Ed Katz, president of the International Office Moving Institute (IOMI®) at Georgia Highlands State College in Cartersville, GA, email@example.com
Mat-A-Doors® protect entrance doors.